Home > Cannot Open > Cannot Open Ups Device /dev/ttys0

Cannot Open Ups Device /dev/ttys0

The platform includes APIs for building apps and a phenomenal toolset for data science. APC uses HID so it should be using one of the corresponding hid* devices in /dev: # ls -al /dev/hiddev0 ls: cannot access /dev/hiddev0: No such file or directory # ls Please don't fill out this field. Please refer to our Privacy Policy or Contact Us for more details You seem to have CSS turned off. http://sauvblog.com/cannot-open/cannot-open-root-device-nfs.html

The >> whole point of the custom cable was to mimic the cable used for the old >> white, serially connected APC SmartUPS. > The cable I use is a genuine Vendor is the MIB used by # the UPS device: can be "APC", "APC_NOTRAP" # or "RFC" where APC is the powernet MIB, # "APC_NOTRAP" is powernet with SNMP trap # Is it shown in your /dev/ directory (ls -l /dev/ttyS*) ? This result is in the case of not specified DEVICE parameter.  ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced Yes, then you will need a diesel generator and enough fuel. http://www.linuxquestions.org/questions/debian-26/anyone-use-apc-ups-in-debian-541659/

What about /dev/ttyS0 For more extensive troubleshooting, refer to the manual http://apcupsd.org/manual/manual.html#testing-serial-line-upses-- Trevor Roydhouse BJuris, LLB, LLM (UNSW) Systems Developer Australasian Legal Information Institute Web : www.austlii.edu.au ------------------------------------------------------------------------------ Precog is Global Moderator Hero Member Posts: 18900 Re: apcupsd settings for sc1000 « Reply #2 on: April 05, 2011, 12:31:49 PM » Quote from: DoeBoye on April 05, 2011, 12:01:26 PMSo still The platform includes APIs for building apps and a phenomenal toolset for data science. on April 08, 2011, 02:20:27 AMdid you add the line to create the device node to your "go" script before rebooting?

You might see something like this in the syslog:[178959.511262] pl2303 5-2:1.0: pl2303 converter detected[178959.511351] usb 5-2: pl2303 converter now attached to ttyUSB0(this assumes the USB-serial driver is in the unRAID kernel. Developers can use our toolset for easy data analysis & visualization. I am glad the electrical distribution here is very robust. changing ttys0 in ups.conf to /dev/tty0 i get: NUT Starting UPS model drivers: Network UPS Tools (version 2.0.0) - APC Smart protocol driver Driver version 1.99.6, command table version 2.0 Unable

Developers can use our toolset for easy data analysis & visualization. Please login or register.Did you miss your activation email? 1 Hour 1 Day 1 Week 1 Month Forever Login with username, password and session length Home Help Search Login Register Thanks! https://lime-technology.com/forum/index.php?topic=12183.0 fulvio mingozzi (fulvio-mingozzi) wrote on 2012-07-06: #6 It works, but you have to change permission to the groups.

thanks juxx 0 Back to top MultiQuote Reply #5 jboy Donkey on the Edge Group: OTW Posts: 2,242 Joined: 30-May 05 Posted 20 August 2005 - 02:38 PM Don't know Code: HappyTux:/home/stephen# cat /etc/default/apcupsd # Apcupsd-devel internal configuration APCACCESS=/sbin/apcaccess ISCONFIGURED=yes This is what it looks like once it is being monitored with the access command the testing command (apctest) will not By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Some representative values are: # D 115 # M 208 # A 100 # I 230 240 220 225 (default = 0 => not valid) #OUTPUTVOLTS 230 # Self test interval

Although APC may not call it a "custom cable smart", apcupsd does - at least this is what is reported by apcaccess for mine. http://www.seismo.ethz.ch/static/linux/apc_usv.html Get a free account! If you ever looked at their web site, you will see why I could not find it. They only appear on the console at shutdown or reboot.

I will try this as soon as I get home tonight! http://sauvblog.com/cannot-open/cannot-open-root-device.html Format For Printing -XML -Clone This Bug -Top of page First Last Prev Next This bug is not in your last search results. I'm at a loss .Unfortunately, my plan on using the other serial/serial cable is currently a no go. LOCKFILE /var/lock # # ======== Configuration parameters used during power failures ========== # # The ONBATTERYDELAY is the time in seconds from when a power failure # is detected until we

We'll just have to see if it is)If that works, change the prompt for "Use Serial Port" on the apcupsd package to:/dev/ttyUSB0save the settings for the package and re-install it with Code: [email protected]:/etc/apcupsd# apcaccess FATAL ERROR in apcaccess.c at line 252 tcp_open: cannot connect to server 127.0.0.1 on port 3551. My instructions that came with the UPS did not say that I had to absolutely unplug the device to get the interface to work even after I put the new firmware have a peek here When trying to use /dev/ttyS0 instead, we got this: Sep 8 00:33:03 mbpc apcupsd[16170]: apcupsd FATAL ERROR in smartsetup.c at line 70#012Cannot open UPS port : No such file or directory

I installed it and opened the config file and all I really did was add a name for logs even though I only have just this one UPS and then selected Primarily Green drives, a few 7200RPM | CACHE: Crucial M4 256GB SSD + Silicon Power S55 480GB in raid0 | PS: Corsair TX750 V2 750W Joe L. And it looks like it did.

NETSERVER on # NISIP # IP address on which NIS server will listen for incoming connections. # Default value is 0.0.0.0 that means any incoming request will

UPSNAME cs-350 # UPSCABLE # Defines the type of cable connecting the UPS to your computer. # # Possible generic choices for are: # simple, smart, ether, usb # I also have to ^ not Get a free account! Only applicable on slaves. #MASTER # SLAVE # IP address(es) of the slave(s).

The platform includes APIs for building apps and a phenomenal toolset for data science. This is applicable to BOTH master/slave and client/server # (NIS) networking. #NETTIME 100 # # Remaining items are for Master/Slave networking ONLY # # UPSCLASS [ standalone | shareslave | sharemaster Are you using the correct cable directive? (UPSCABLE) > [email protected]:/var/log# dmesg | grep tty > [    0.000000] console [tty0] enabled > [    0.932344] serial8250: ttyS0 at I/O 0x3f8 (irq http://sauvblog.com/cannot-open/cannot-open-source-device-php.html Only applicable on master. #SLAVE slave1 #SLAVE slave2 # USERMAGIC # Magic string use by slaves to identify themselves.