Home > Cannot Open > Cannot Open Etc Asound State For Reading

Cannot Open Etc Asound State For Reading


Homepage: http://www.alsa-project.org/ Original-Maintainer: Debian ALSA Maintainers BicyclerBoyOctober 28th, 2011, 08:51 PMI've just rebooted into 11.10 & that path exists & has 12 .ko files including snd-hda-intel.ko... Join Date Dec 2010 Posts 6 Cannot open /var/lib/alsa/asound.state for writing Hi, decided to install arch and am stuck at one of the steps detailed in the guide. Where can I find logs on this? matt_symesOctober 15th, 2011, 08:11 PM*bump* taco143October 18th, 2011, 03:00 AM-bump- Please help xD taco143October 22nd, 2011, 02:59 AM*Bump* Getting frustrated, looking everywhere and noone seems to have this happenned before D: have a peek at this web-site

Now the card 0 is not even showing.now this happens [[email protected] ~]$ fuser -fv /dev/snd/* Specified filename /dev/snd/by-path is not a mountpoint. If anyone can help, I can put up more info if requested. It would be nice if alsactl and the driver dealt with this problem in a better way. If both are left unmuted then the sounds is killed from the speakers if the headphone plug is in use regardless of AlsaMixer settings.

Alsactl: State_lock:125: File /var/lib/alsa/asound.state Lock Error: File Exists

Specified filename /dev/snd/pcmC1D3p is not a mountpoint. Open a terminal and type (or copy and paste - case sensitive) lspci -nnk | grep -iA3 audioPost the results back here. I use xfce, so don't ask me exactly how to do that in Unity.. 4tonylandAugust 5th, 2016, 01:39 PMI am having a very similar problem after upgrading from 14.04 to 16.04. Kind regards taco143October 8th, 2011, 03:20 AM~$ alsactl init alsactl: init:1743: No soundcards found... ~$ sudo alsactl store alsactl: save_state:1519: No soundcards found... ~$ alsamixer cannot open mixer: No such file

The default is              /etc/asound.state. _______________________________________________ Linux-audio-user mailing list [hidden email] http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user « Return to linux-audio-user | 1 view|%1 views Loading... Afterwards alsa-restore should work. The time now is 10:31 AM. Sorry about that!

This appears to be the same problem as this thread. Alsactl Store On shutting down the mixer state is stored in /var/lib/alsa/asound.state. Brickman-2 Reply | Threaded Open this post in threaded view ♦ ♦ | Report Content as Inappropriate ♦ ♦ What is asound.state ? For alsamixer or amixer to be available you need alsa-utils to show in the output of that command, so if it doesn't seem to be installed, add it and try running

ls -l /var/lib/alsa/asound.state cat /var/lib/alsa/asound.state Kind regards taco143October 3rd, 2011, 10:31 PMHi It's not an issue with one of the config files is it ? Julien Claassen wrote: > Hi Jonathan! > the asound.state, whereever it is, it has different locations, don't know if > based on alsa-version or distro. It may not be clear because it's only in the title, and not in the > comment, but the kernel in which it doesn't work is 2.6.12-8. Specified filename /dev/snd/seq is not a mountpoint.

Alsactl Store

I just upgraded from the 2.6.28-12 to 2.6.28-13 kernel and sound does not work. http://linux-audio.4202.n7.nabble.com/What-is-asound-state-td19401.html I seem to remember, that it can be helpful to delete > them. > NOTE BENE: If you like your soundcard settings as they are and if there's a > Alsactl: State_lock:125: File /var/lib/alsa/asound.state Lock Error: File Exists Thank so much! arkmundi (rkerver) wrote on 2009-07-08: #18 Confirm problems in Jaunty, upgrading to 2.6.28-13 kernel.

kazakoreJune 13th, 2016, 02:30 AMI have this exact same issue on my laptop internal sound card (not tried with my external.) I usually use headphones and they aren't affected if I Check This Out Free forum by Nabble Edit this page Ubuntu Forums > The Ubuntu Forum Community > Ubuntu Official Flavours Support > Multimedia Software > alsamixer not saving configuration PDA View Full Version aplay -r 4.4.0-24-lowlatency kazakoreJune 14th, 2016, 02:58 AMDefinitely related in some way to the headphone switch and the fixes mentioned in earlier posts have done nothing to fix it (alsactl store/restore Juerd (ubuntu-juerd) wrote on 2005-09-20: #6 Flipping that bit helped.

alsa source code) that does not work very well with msi If that stuff works then a workaround is to have this line in /etc/modprobe.d/alsa-base.conf: options snd-hda-intel index=0 enable_msi=0 taco143October 27th, Should I allow my child to make an alternate meal if they do not like anything served at mealtime? Logged LinuxUser01 Full Member Posts: 111 Re: alsa sound not loading properly « Reply #3 on: September 21, 2013, 04:32:14 PM » I have tried different features in emeIFM2 to get http://sauvblog.com/cannot-open/cannot-open-for-reading.html Join Date Dec 2010 Posts 6 Chmod it, or chown I guess.

If PA is set to respawn or getting idle after a period of time and there was a change/corruption in configuration, that might have been the cause. ls -l /var/lib/alsa/asound.state cat /var/lib/alsa/asound.stateKind regards $ ls -l /var/lib/alsa/asound.state ls: cannot access /var/lib/alsa/asound.state: No such file or directory $ cat /var/lib/alsa/asound.state cat: /var/lib/alsa/asound.state: No such file or directory [email protected]:~$ Also, In reply to this post by James Cameron On Tuesday 27 October 2009 05:44:09 James Cameron wrote: > On Mon, Oct 26, 2009 at 06:39:18PM -0500, Jonathan E.

I try to run Code: # alsactl -f /var/lib/alsa/asound.state store but it gives me the error message save_state:1532: Cannot open /var/lib/alsa/asound.state for writing: No such file or directory Help!

I do not think that pulseaudio is actually running (it may be idle), it only shows control of mixers not actual devices (usually grabs card pcmC0D0p / hwC0D0). You could try to update the alsa kernel drivers by adding the ubuntu audio dev ppa https://launchpad.net/~ubuntu-audio-dev/+archive/ppa?field.series_filter=natty This cnd: sudo modprobe snd-hda-intel should not come back with errors; especially errors about from default.pa conf### Load audio drivers statically ### (it's probably better to not load these drivers manually, but instead ### use module-udev-detect -- see below -- for doing this automatically) #load-module It will not be echoed to the screen.

Why won't curl download this link when a browser will? It did work for me in earlier kernels (2.6.10, from hoary). It is the place where ALSA (alsactl) stores all the volumes and settings for your cards. http://sauvblog.com/cannot-open/cannot-open-usb-open-with.html Still, I have no explanation for this strange behaviour.

Thanks for your help. alsa-firmware alsa-lib alsa-plugins alsa-tools alsa-utils permalinkembedsavegive gold[–][deleted] 0 points1 point2 points 11 months ago(8 children)sudo apt-get install alsa-firmware alsa-lib alsa-plugins alsa-tools alsa-utils Reading package lists... Have you installed OSS packages in synaptic ? (get rid of them) This h/w looks to be nVidia chipset..there are suggestions (inc. Should I remove alsa?

What was Stan Lee's character reading on the bus in Doctor Strange Do humans have an obligation to prevent animal on animal violence? Done Building dependency tree Reading state information... mickee384June 2nd, 2016, 06:05 PMThanks, i will try that. Try which alsamixer in terminal and it should output /usr/bin/alsamixer or similar, so try that full path in terminal, ie /usr/bin/alsamixer or whatever, and see if you still get the same

See original description Add tags Tag help Related branches lp:~ubuntu-core-dev/alsa-utils/ubuntu.new lp:ubuntu/natty/alsa-utils Daniel T Chen (crimsun) wrote on 2005-09-19: #1 I have an X41 model 2527, and sound works fine with it. Try which alsamixer in terminal and it should output /usr/bin/alsamixer or similar, so try that full path in terminal, ie /usr/bin/alsamixer or whatever, and see if you still get the same Kevin Tappe (kevintappe-deactivatedaccount) wrote on 2005-09-22: #9 I had the same problem on my IBM T43: Headphone Jack Sense AND Line Jack Sense need to be muted to make it work On both Fedora and ArchLinux the default > is '/etc/asound.state'. > > I believe that /var/lib/alsa is the default location in Debian.

Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version Edit: got this while trying to run alsamixer. "cannot open mixer: No such file or directory" ajgreenyOctober 2nd, 2011, 08:20 PMVery odd, and I don't know quite where to go from How do we assign an initial value to a lookup field in sharepoint add in? As I said, I'm still new xD how do I check if it's executable? -rwxr-xr-x 1 root root 51376 2011-04-20 12:10 /usr/bin/alsamixer That was the output, Sorry my computer is baffling

http://www.webupd8.org/2009/06/sound-muted-after-restart-in-ubuntu.html (http://www.webupd8.org/2009/06/sound-muted-after-restart-in-ubuntu.html) mickee384April 29th, 2016, 07:45 PMstill not working. Why is this C++ code faster than my hand-written assembly for testing the Collatz conjecture? Restart after changes.PS. My model is 2525 - this shouldn't matter.

I've ran sudo alsaconf and had it configure and ran the speaker test successfully. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version Technically it should be assigned to alsa-utils, not linux, because on state restoration the mixer is important not the modules.